Version 32 (modified by duncan, 3 years ago)

Update the new event design to match current prototype impl

The analysis of the semantics of +RTS -s

Here is a sample output of +RTS -s, annotated with a discussion of new events required to simulate it in ThreadScope? (for a user-selected time interval). A list of the new required events is in the second part of this page. Here is a screenshot of what we can already do using the current set of events. It so happens we can do as much for the whole runtime as for the selected time intervals with the currently available events, but in general, intervals require more kinds of events and more samples. Similarly, when we visualize some of this as graphs and especially graphs of rates of change of some values (e.g., memory usage), more frequent sampling will be required.

The first line of +RTS -s follows.

     237,179,528 bytes allocated in the heap

We'd need an extra event, emitted at each GC, with the allocation since the previous GC. (We really don't want an event for every memory allocation, that would be impractical and very slow.)

      52,785,584 bytes copied during GC

An event with a summary of all copying done, emitted after the end of each GC.

      17,272,336 bytes maximum residency (5 sample(s))

A separate event for that, perhaps emitted only after major GC when we know how much memory is really used by the program. The docs explain the "n samples" above saying "only checked during major garbage collections".

       6,493,328 bytes maximum slop

We also need an extra event for slop, probably emitted rarely.

              45 MB total memory in use

The peak "total memory in use" to date is stored in the peak_mblocks_allocated global var. It changes often, but we can't spam too much, so let's emit it only after each GC, and not the peak value to date, but the current value.

                  (0 MB lost due to fragmentation)

Fragmentation is calculated in the RTS -s code as follows:

 (peak_mblocks_allocated * BLOCKS_PER_MBLOCK * BLOCK_SIZE_W - hw_alloc_blocks * BLOCK_SIZE_W) / (1024 * 1024 / sizeof(W_))

Note that it uses the peak and high-water values and we instead want the current values. It's calculated as the difference of mblock and block allocations, so we need an extra events for allocated block (mblocks are already recorded in "total memory in use" above).

                                    Tot time (elapsed)  Avg pause  Max pause
  Gen  0       448 colls,     0 par    0.04s    0.04s     0.0001s    0.0016s
  Gen  1         5 colls,     0 par    0.07s    0.07s     0.0149s    0.0386s

The current GC events (in particular RequestParGC) seem to be enough to distinguish between seq and par GC. We'd need to split the current GC events into generations, though, to report for every generation separately. We may and up with two tables for the same GC info: one aggregated by cap, another by generations. Or, as long as there are only 2 generations, one table with both caps and generations, with the following rows: cap0&gen0, cap0&gen1, cap1&gen0, etc. Note that we don't want to report the CPU time, only the elapsed time, and that's fine.

  Parallel GC work balance: 1.00 (6391526 / 6375794, ideal 2)

Let's ignore that one for now. JaffaCake? says we probably don't care about work balance and that he thinks it is computed in the simplest way. Detail are in http://community.haskell.org/~simonmar/papers/parallel-gc.pdf. The current computation seems to be the following: total words copied during parallel GCs divided by the average over all parallel GCs of maximal number of words copied by any thread in a single par GC. Events needed: the events added above probably suffice, but quite a bit of extra state will have to be maintained when reading the events due to the rather complex formula for work balance.

                        MUT time (elapsed)       GC time  (elapsed)
  Task  0 (worker) :    0.04s    (  0.38s)       0.13s    (  0.17s)
  Task  1 (worker) :    0.00s    (  0.55s)       0.00s    (  0.00s)
  Task  2 (bound)  :    0.41s    (  0.41s)       0.13s    (  0.13s)
  Task  3 (worker) :    0.00s    (  0.55s)       0.00s    (  0.00s)

JaffaCake? says the task information has questionable usefulness, so let's ignore that one for now. It's much more natural for us to present the same info per cap, not per OS thread (which the tasks basically are). Actually we do present the GC info per cap (not only total, as in +RTS -s) already and the total activity time per cap (which includes the mutator time) is much better conveyed by the graphs in ThreadScope?.

BTW, the time between events GCIdle and GCWork is still counted as GC time, so we may ignore the events for calculating the times spent on GC. OTOH, a summary of the GCIdle times, per hec, then the total, also as the percentage of all GC time could be useful. Probably we can do that cheaply along the way since we have to identify and sift out the GCIdle, GCDone and GCWork events anyway.

  SPARKS: 300001 (17739 converted, 282262 overflowed, 0 dud, 0 GC'd, 0 fizzled)

Tell JaffaCake? that the example and description for the SPARKS count at

http://www.haskell.org/ghc/docs/latest/html/users_guide/runtime-control.html#rts-options-gc

needs updating (not sure for which GHC version, though). Otherwise, we have enough events for that (we calculate this using the SparkCounters? events, but we could also use the precise per-spark events).

  INIT    time    0.00s  (  0.00s elapsed)
  MUT     time    0.42s  (  0.41s elapsed)
  GC      time    0.29s  (  0.13s elapsed)
  EXIT    time    0.00s  (  0.00s elapsed)
  Total   time    0.71s  (  0.55s elapsed)

(Note that there may be more times listed above, e.g., the time overhead of profiling.) We can sum up the GC time from GC events. We get the total of GC and MUT time (and PROF, etc.) as the time from the start of the first event to the (end of) the last event, so from the total and the GC time we can normally compute MUT. We can assume that INIT and EXIT are negligible (I wonder when they are not) and anyway they don't make sense for when we summarize an interval. If we insist on them, a separate event for each would be required.

%GC time      89.5%  (75.3% elapsed)

This line does not appear in threaded RTS, so we disregard it.

  Alloc rate    564,074,971 bytes per MUT second

The events added above should suffice, except that we use elapsed time, not CPU time.

  Productivity  59.0% of total user, 76.6% of total elapsed

The events added above should be enough. Again. we only do the elapsed case, so we'd show elapsed/elapsed, while the figures above are cpu/cpu and cpu/elapsed. JaffCake? thinks the latter mixture is OK. However, it mixes the productivity of CPU mutation vs elapsed mutation with the productivity of mutation vs GC. In this light, out figure will not be that bad, because it's consistent, even if not as accurate as the equally consistent first figure above.

BTW, the fact that the second figure is higher (I can reproduce it), shows a problem with clocks or some other problem. I'd guess the elapsed time should always be higher than the CPU time, shouldn't it?

The list of needed new events or even parameters

There is a wealth of statistics around heaps and GC. Some of the stats are reasonably common, shared by different implementations while many more are highly specific to a particular implementation. Even if we ignore RTSs other than GHC, we still have an issue of flexibility for future changes in GHC's RTS.

Our solution is to split the stats into two groups, a general group that make sense in many implementations, and a second that are highly GHC-specific. Analyses and visualisations based on the first group are likely to be portable to other RTS instances and changes in GHC's RTS. The second is likely to have to change when GHC changes, but it does at least contain the less frequently used info and does not need so much visualisation.

New general memory stats events

  • EVENT_HEAP_ALLOCATED (alloc_bytes): is the total bytes allocated over the whole run by this HEC. That is we count allocation on a per-HEC basis. This event is in principle not tied to GC, it could be emitted any time.
  • EVENT_HEAP_SIZE (heap_capset, size_bytes): is the current bytes allocated from the OS to use for the heap. For the current GHC RTS this is the MBlocks, kept in the mblocks_allocated var. Again, this in principle could be emitted any time. The maximum accuracy would be to emit the event exactly when MBlocks are allocated or freed.
  • EVENT_HEAP_LIVE (heap_capset, live_bytes): is the current amount of live/reachable data in the heap. This is almost certainly only known after a major GC.

New GHC-specific general memory stats events

  • EVENT_HEAP_INFO_GHC (heap_capset, gens, max_size, nursary_size): various static parameters relating to the heap. In particular it tells us the number of generations.
  • EVENT_GC_STATS_GHC (heap_capset, gen, copied, slop, frag, was_par, max_copied, avg_copied): various less used GC stats. These are all GHC-specific, and specific to current GC design. It includes the generation of this GC so along with knowing the total number of generations we can identify major/minor GCs. We also include memory lost to slop and fragmentation. The final three are to do with parallel GC: the first is just a flag to indicate if this GC was a parallel GC, the ratio of the other two gives the parallel work balance (this ratio can be extended to multiple GCs to get an average figure).

Identifying heaps in eventlogs

In the above events, the "allocated since program start" is done per-HEC, but the others apply to the heap as a whole, not a particular HEC.

For completeness explicitly identify heaps by identifying the heap to which the events apply. (Remember that we can merge event logs from multiple processes, so there is already no truly global notion of heap, implicitly it would be the single heap belonging to the HEC that emits the event. We would also have to make the assumption that there is a single heap per OS process (we can already identify which HECs belong to the same OS process). Alternatively we can explicitly identify heaps using the existing capset (capability set) mechanism.)

The GHC RTS already puts all of its HECs into a capset for the OS process. We can reuse this capset.

If in future we allow multiple independent heaps in the same OS process (e.g. separate RTS instances) then this scheme would let us cope by making a separate capset. Similarly it'd cope with implementations like GdH which use a global heap spanning multiple OS processes.

Tinkering

While we tinker with these events, we could try to ensure that RequestSeqGC and RequestParGC are emitted before their corresponding GC_START events, by using the following tip from JaffaCake?: "actually you could try moving the interruptAllCapabilities() call in Schedule.c:1500 down below the traceEvent calls". Currently they can be emitted in arbitrary order and it complicates analysis, especially for selected intervals (and complicates and makes less strict the future validation of the events).